Cantilever design, high safety and security standard, fully preassembled
Hörmann sliding gates made of sturdy steel profiles are supplied as a complete element with an opening width of up to 12 metres. Using two systems working in opposite directions, it is therefore possible to achieve a width of 24 metres. The construction is self-supporting. The benefits: minimum foundation work. no ground track installation, ice and snow or even heavy soiling will not affect the smooth operation of the gate.
Steel-sliding gate HSS
Hörmann's HSS sliding gates stands for high- quality individual components and cost- optimized state-of-the art series production. Prompt delivery is ensured by standardized component dimensions. The HSS sliding gate is a practical solution at a competitive price. The elegent design of the gate harmonizes perfectly with its surroundings and does not take second place when compared with the securith and quality of the HS sliding gate. Depending on the width of your entrance you can select from two types of gates and several equipment options.Gate type HSS 160
Height of bottom cantilever 160 mm
Depth of bottom cantilever 165 mm
Clear passage width up to 7000 mm
Drive power 0.18 KW Gate type HSS 200
Height of bottom cantilever 200 mm
Depth of bottom cantilever 165 mm
Clear passage width up to 9000 mm
Drive power 0.37 KW Steel-siliding gate HS
The first impression is crucial- therefore, it is important that your business partners, visitors and staff get the right impression when entering your premises for the first time. This is ensured by the endless designs you can choose form. Individual requirements can for custom-made solutions. Depending on the width of your entrance you can select from four types of gates and an array of optional extras Gate type HS 160
Height of bottom cantilever 160 mm
Depth of bottom cantilever 165 mm
Clear passage width up to 6000 mm
Driver power 0.18 KW Gate type HS 200
Height of bottom cantilever 200 mm
Depth of bottom cantilever 165 mm
Clear passage width up to 8000 mm
Driver power 0.37 KW Gate type HS 280
Height of bottom cantilever 280 mm
Depth of bottom cantilever 200 mm
Clear passage width up to 12000 mm
Driver power 0.75 KW Gate type HS 380
Height of bottom cantilever 380 mm
Depth of bottom cantilever 200 mm
Clear passage width up to 135000 mm, up to 16000 mm on request
Driver power 0.75 KW Alu-sliding gate HSB
Hormann's standardized sliding gate system "Basis" enables you to design the gate leaf in keeping with your own ideas or the requirements of your customsers. What you get is a preassembled, ready-to-plug-in functional module inclusive of an operator and the control and security system. everything is wired ready to be plugged in and approved by the Technical supervisory Board( TÜV) The superstructure just needs to be bolted to the bottom cantilever! Timed-tested, precisely matched components ensure a reliable service.
As the functional module has been tested for compliance with the new laws and standards at our factory. You can be sure that the gate system will meet all prevailing standards provided the prescribed design and structural strength guidelines are observed. Clear passage width: 3m-6m
Opening direction with view from outside: left or right
Bottom cantilever height: 175 mm
Colour: aluminium, anodised EV1
Always perfectly aligned
Pretensioning of the gate leaf construction reduces the risk of bowing. The gate leaf is precisely aligned in the gateway.
HSA electric operator on request
With dead man's or impulse control. Fitted into the bottom cantilever, protected from the weather and concealed from view. Frictionally engaged power transmission, free from play, low-maintenance worm gear with frame-mounted 3-phase current motor disengagement for manual operation. Supplied already fitted, operator and control unit prewired, control box or cabinet designed as a water-tight unit.
Elektro-Antrieb HSA
|
|
Choice of colours to RAL
The following colours based on the RAL colour chart are available:- RAL 6005 Moss Green
- RAL 7016 Anthracite Grey
- RAL 7030 Stone Grey
- RAL Pebble Grey
- RAL 9010 Pure White
- Special colours on request
|
